|
|
|
National Stock Number:
5315-00-553-6060
Federal Supply Class:
5315
National Item Identification Number:
005536060
Description:
PIN,SHOULDER,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING A SOLID SHANK IN STEPS OF TWO OR MORE DIFFERENT DIAMETERS UNDER AND IN ADDITION TO THE HEAD. EXCLUDES PIN, ECCENTRIC.
|
Manufacturer Information:
| 11699813 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | PHOSPHATE ZINC OVERALL | | HARDNESS RATING | 43.0 ROCKWELL C MINIMUM AND | | 48.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | UNDER HEAD LENGTH | 2.113 INCHES MINIMUM AND | | 2.138 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.495 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.215 INCHES MINIMUM AND | | 0.225 INCHES MAXIMUM | | SECOND STEP DIAMETER | 0.309 INCHES MINIMUM AND | | 0.312 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.898 INCHES MINIMUM AND | | 1.913 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | HEAD STYLE | FLAT CHAMFER | | PIN HEAD DIAMETER | 0.610 INCHES MINIMUM AND | | 0.620 INCHES MAXIMUM | | HEIGHT | 0.087 INCHES MINIMUM AND | | 0.092 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | 0.240 IN. MIN 0.250 IN. MAX DIA BY 0.025 IN. MIN 0.030 IN. MAX RADIUS ANNULAR RELIEF ON SECOND STEP AT FIRST STEP END AND 0.094 IN. MIN 0.097 IN. MAX DIA HOLE THRU SECOND STEP 1.775 IN. MIN 1.785 MAX FROM UNDERSIDE OF FIRST STEP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 11699813 |
|
|