|
|
|
National Stock Number:
5315-00-491-5435
Federal Supply Class:
5315
National Item Identification Number:
004915435
Description:
PIN,STRAIGHT,KNURLED
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED, STRAIGHT, SOLID ITEM WITH OR WITHOUT A DRILLED HOLE(S). IT HAS A STRAIGHT OR DIAMOND KNURL. ITS LENGTH MUST NOT EXCEED 12 INCHES (304 MM). IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM.
|
Manufacturer Information:
| 0N171041 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| DIAMETER | 0.311 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END TIP RADIUS | 0.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL | | KNURL LENGTH | 0.140 INCHES NOMINAL | | KNURL OUTSIDE DIAMETER | 0.490 INCHES NOMINAL | | KNURL TO END DISTANCE | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 416 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.880 INCHES NOMINAL | | SPECIAL FEATURES | BULLET NOSE 0.250 IN. DIA | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.250 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | STYLE DESIGNATOR | STRAIGHT KNURLED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-7742 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|