|
|
|
National Stock Number:
5315-00-484-1708
Federal Supply Class:
5315
National Item Identification Number:
004841708
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10887415 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315004841708 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.113 INCHES MINIMUM AND 0.143 INCHES MAXIMUM | | CHAMFER LENGTH | 0.030 INCHES NOMINAL | | DIAMETER | 0.2510 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.090 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.380 INCHES NOMINAL | | UNDER HEAD LENGTH | 0.910 INCHES MINIMUM AND 0.930 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 63.0 MICROINCHES SHANK END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TY Z CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
|
|