|
|
|
National Stock Number:
5315-00-435-5085
Federal Supply Class:
5315
National Item Identification Number:
004355085
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 570960-1 | 96214 | RAYTHEON COMPANY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.070 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 0.312 INCHES NOMINAL | | MATERIAL | STEEL COMP 316 OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHOULDER DIAMETER | 0.375 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.188 INCHES NOMINAL | | SECOND UNDERCUT DIAMETER | 0.156 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.045 INCHES NOMINAL | | SHANK DIAMETER | 0.188 INCHES NOMINAL | | SHANK LENGTH | 0.100 INCHES MINIMUM | | UNDERCUT WIDTH | 0.045 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.156 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.100 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|