|
|
|
National Stock Number:
5315-00-432-0674
Federal Supply Class:
5315
National Item Identification Number:
004320674
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1044220 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.000 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.067 INCHES NOMINAL | | HARDNESS RATING | 19.0 ROCKWELL C MINIMUM AND 23.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PIN OVERALL LENGTH | 1.250 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1527 INCHES MINIMUM AND 0.1531 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.067 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SHEAR STRENGTH | 70000 DOUBLE POUNDS PER SQUARE INCH |
|
|