|
|
|
National Stock Number:
5315-00-406-0140
Federal Supply Class:
5315
National Item Identification Number:
004060140
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1210356 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OR | | PAINT OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.032 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.092 INCHES MINIMUM AND | | 0.098 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.092 INCHES MINIMUM AND | | 0.098 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.000 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 3.250 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL |
|
|