|
|
|
National Stock Number:
5315-00-390-0519
Federal Supply Class:
5315
National Item Identification Number:
003900519
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 575746-1 | 3B150 | RAYTHEON COMPANY | | 575746-1 | 49956 | RAYTHEON COMPANY | | 575746-1 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 420 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.580 INCHES NOMINAL | | SHOULDER DIAMETER | 0.440 INCHES NOMINAL | | SHANK DIAMETER | 0.184 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM | | OVERALL LENGTH | 0.960 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.185 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.580 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED AND COUNTERSUNK | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END COUNTERSINK DIAMETER | 0.120 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES MINIMUM | | FIRST END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | SHORT SHANK END | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.075 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.077 INCHES NOMINAL | | SURFACE FINISH | 63.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 3B150 | | DESIGN CONTROL REFERENCE | 575746-1 |
|
|