|
|
|
National Stock Number:
5315-00-356-2659
Federal Supply Class:
5315
National Item Identification Number:
003562659
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 10122624 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 26527119 | 45153 | HAMILTON SUNDSTRAND CORPORATION | | 26527119 | 55820 | RTX CORPORATION | | 26527119 | 79318 | MEGGITT NORTH HOLLYWOOD INC | | 26527119 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.025 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.125 INCHES | | OVERALL LENGTH | 0.781 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END SLOT DEPTH | 0.030 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.062 INCHES NOMINAL | | SHANK DIAMETER | 0.125 INCHES NOMINAL | | SHANK LENGTH | 0.378 INCHES NOMINAL | | SHOULDER DIAMETER | 0.246 INCHES MINIMUM AND 0.247 INCHES MAXIMUM | | SPECIAL FEATURES | 0.093 IN. WIDE BY 0.0485 IN. DEEP GROOVE CUT 0.359 IN. FROM UNTHREADED END | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.316 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | UNDERCUT DIAMETER | 0.094 INCHES NOMINAL | | UNDERCUT WIDTH | 0.060 INCHES NOMINAL |
|
|