|
|
|
National Stock Number:
5315-00-350-1838
Federal Supply Class:
5315
National Item Identification Number:
003501838
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10163750 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 634 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5743 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 37.0 ROCKWELL C MINIMUM AND | | 44.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.140 INCHES MINIMUM AND | | 0.145 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.140 INCHES MINIMUM AND | | 0.145 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.220 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.440 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.880 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.6180 INCHES MINIMUM AND | | 0.6230 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 10163750 |
|
|