|
|
|
National Stock Number:
5315-00-320-0368
Federal Supply Class:
5315
National Item Identification Number:
003200368
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 869827PC7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | AX421-102PC7 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.140 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | SHANK DIAMETER | 0.1232 INCHES MINIMUM AND | | 0.1234 INCHES MAXIMUM | | OVERALL LENGTH | 2.490 INCHES MINIMUM AND | | 2.510 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.1232 INCHES MINIMUM AND | | 0.1234 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.021 INCHES MINIMUM AND | | 0.041 INCHES MAXIMUM | | FIRST END OUTER RADIUS | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | ROUND | | FIRST END LOCATION | SHANK END | | SPECIAL FEATURES | SHOULDER 20 PITCH DIAMOND KNURLED AND UNDERCUT BETWEEN SHOULDER AND SHANK 0.03 IN. W BY 0.02 IN. DEEP |
|
|