|
|
|
National Stock Number:
5315-00-290-9170
Federal Supply Class:
5315
National Item Identification Number:
002909170
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| F52114-134 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.400 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.970 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 60.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.094 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 29.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.3750 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.120 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
|
|