|
|
|
National Stock Number:
5315-00-286-0186
Federal Supply Class:
5315
National Item Identification Number:
002860186
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 11A8912 | 95201 | NAPCO INTERNATIONAL LLC | | 11EJW2 | 76040 | MACK TRUCKS INC PARTS OPN | | 2021947 | 24617 | GENERAL MOTORS CORP | | 1846S71 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 1846S71 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 2021947 | 7X677 | GENERAL MOTORS LLC | | 5214976 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5282741 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | A214976 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | A282741 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 250M1 | 56442 | DIAMOND REO TRUCK CO | | 4AA01138 | 62265 | VOLVO TRUCKS NORTH AMERICA INC. DBA FOREIGN PARENT IS VOLVO LASTVAGNAR AB GOTEBORG SWEDEN. | | F4396 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | 306948 | 65282 | WHITE MOTOR CORP | | FC4396 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.764 INCHES MINIMUM AND | | 0.774 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.422 INCHES MINIMUM AND | | 0.453 INCHES MAXIMUM | | SHANK DIAMETER | 0.245 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | OVERALL LENGTH | 1.047 INCHES MINIMUM AND | | 1.078 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.078 INCHES MINIMUM AND | | 0.109 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.307 INCHES MINIMUM AND | | 0.309 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.151 INCHES MINIMUM AND | | 0.161 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | LONG END |
|
|