|
|
|
National Stock Number:
5315-00-276-4719
Federal Supply Class:
5315
National Item Identification Number:
002764719
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 30405PC254 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | 30405PC254 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D27373 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | D27373 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D27373 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 30405PC254 | 93235 | TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59 | | D30407PC298 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | V8581-3 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | V8581-3 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D30407PC298 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D30407PC298 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D30405PC254 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | D27373 | 93235 | TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59 | | D30407PC298 | 93235 | TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59 | | V8581-3 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | V8581-3 | 93235 | TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59 |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.1405 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.1405 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.125 INCHES NOMINAL | | PIN OVERALL LENGTH | 1.375 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3700 INCHES MINIMUM AND | | 0.3800 INCHES MAXIMUM |
|
|