|
|
|
National Stock Number:
5315-00-271-3067
Federal Supply Class:
5315
National Item Identification Number:
002713067
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 511980PC10 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.393 INCHES NOMINAL | | CHAMFER LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | DIAMETER | 0.3755 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | HEIGHT | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL OVERALL | | PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.130 INCHES MINIMUM AND 1.170 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
|
|