|
|
|
National Stock Number:
5315-00-256-6714
Federal Supply Class:
5315
National Item Identification Number:
002566714
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 2528631 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.313 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.718 INCHES NOMINAL | | DIAMETER | 0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.093 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.218 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL COMP 4140 OVERALL | | PIN HEAD DIAMETER | 1.375 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | UNDER HEAD LENGTH | 4.094 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.968 INCHES NOMINAL | | UNDERCUT WIDTH | 0.062 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
|
|