|
|
|
National Stock Number:
5315-00-249-5235
Federal Supply Class:
5315
National Item Identification Number:
002495235
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2658399 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.187 INCHES MINIMUM AND 4.217 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.190 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.090 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | PIN OVERALL DIAMETER | 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.560 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|