|
|
|
National Stock Number:
5315-00-246-7417
Federal Supply Class:
5315
National Item Identification Number:
002467417
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 3S31132-139 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1095 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-808 P-115 TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.440 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.720 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.2420 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 3S31132-139 |
|
|