|
|
|
National Stock Number:
5315-00-240-6175
Federal Supply Class:
5315
National Item Identification Number:
002406175
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1148856-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | H581160602 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES MINIMUM AND 40.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.008 INCHES MINIMUM AND 0.016 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL | | | PIN OVERALL LENGTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0626 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.036 INCHES NOMINAL | | SPECIAL FEATURES | SMALL CHAMFER END MAY HAVE 0.008 IN. MIN 0.015 IN. MAX RADIUS IN LIEU OF CHAMFER | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|