|
|
|
National Stock Number:
5315-00-153-3144
Federal Supply Class:
5315
National Item Identification Number:
001533144
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 3-41424-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 3-41424-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 3-41424-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CHAMFER LENGTH | 0.060 INCHES NOMINAL | | DIAMETER | 0.2480 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | HEAD STYLE | FLAT | | HEIGHT | 0.050 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COMP 4340,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | PIN CHAMFER ANGLE | 30.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | SHEAR STRENGTH | 180000 SINGLE POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT | NICKEL OVERALL | | UNDER HEAD LENGTH | 1.140 INCHES NOMINAL |
|
|