|
|
|
National Stock Number:
5315-00-119-9343
Federal Supply Class:
5315
National Item Identification Number:
001199343
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 29-47909-2 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.180 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.375 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.375 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.440 INCHES MINIMUM AND | | 0.550 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.300 INCHES MINIMUM AND | | 6.360 INCHES MAXIMUM | | SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS | | 125.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 7.180 INCHES MINIMUM AND | | 7.360 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 2.4700 INCHES MINIMUM AND | | 2.5000 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81205 | | DESIGN CONTROL REFERENCE | 29-47909-2 |
|
|