|
|
|
National Stock Number:
5315-00-105-3963
Federal Supply Class:
5315
National Item Identification Number:
001053963
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| S1555288-551-557 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP W110 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-580 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-T-580,GR A,CL W1-10 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.077 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.077 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.704 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.891 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1870 INCHES MINIMUM AND | | 0.1880 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 88277 | | DESIGN CONTROL REFERENCE | S1555288-551-557 |
|
|