5310-14-441-1235 WASHER,FLAT Index 5310-14-441-1237 WASHER,FLAT

National Stock Number:
5310-14-441-1236

Federal Supply Class:
5310

National Item Identification Number:
144411236

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
1013626S00F0555MBDA FRANCE
1013626S00F9073AIRBUS DEFENCE AND SPACE SAS
779530115110 0000VNCB HUNGARY HONVEDSEGI EGYSEGES TERMEKKOD
157010849FAQ15SAFRAN ELECTRONICS & DEFENSE
185668057FAQ15SAFRAN ELECTRONICS & DEFENSE
192323306FAQ15SAFRAN ELECTRONICS & DEFENSE
99151684D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
E25514A60ZTAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
E25514A60ZTAPAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
E25514A60ZTAPAF1236PREAULT TECHNOLOGIES
E25514A60ZTAF1236PREAULT TECHNOLOGIES
99151684F6481THALES SA
99161424F6481THALES SA
99151684F6495ESTERLINE AVIONICS & CONTROLS FRANC
R9ZT060AF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
R9ZT060APAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
Z6A4NFE25-514F0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
RONDELLE Z 6 A4-260HV PASSIVEF6481THALES SA
F300 0T 016 6315F6647SERVICE CENTRAL DES ACHATS DE LA MAINTENANCE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER6.4 MILLIMETERS MINIMUM AND 6.62 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMANUEL 14-G1 CODE ZT MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP A4 OVERALL
III PART NAME ASSIGNED BY CONTROLLING AGENCYRONDELLE Z6 INOX A4 GRADE A NF E25-514
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER11.57 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
TEST DATA DOCUMENTF0110 A03-154. STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THICKNESS1.13 MILLIMETERS MINIMUM AND 1.27 MILLIMETERS MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us