|
|
|
National Stock Number:
5310-12-152-2102
Federal Supply Class:
5310
National Item Identification Number:
121522102
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0110 2804 | D2689 | DEUTZ AG | | 0251933 | H0001 | DAF TRUCKS N.V. | | 1102804 | D2689 | DEUTZ AG | | 1102804EY8822-01 | D2689 | DEUTZ AG | | 06167316112 | D3273 | MAN TRUCK & BUS AG | | 251933 | H0001 | DAF TRUCKS N.V. | | 2916699090 | D8015 | ROBERT BOSCH GMBH | | 912004018101 | D8046 | DAIMLER AG | | A18DIN128-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | A18DIN128A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 91638266 | F6481 | THALES SA | | 9451-251933 | H0001 | DAF TRUCKS N.V. | | 912004018101 | Z0C81 | MERCEDES-BENZ AUSTRALIA/PACIFIC PTYLTD DEALER PARTS ASSISTANCE CENTRE | | 912004018101 | Z2G22 | MERCEDES-BENZ AUSTRALIA/PACIFIC PTYLTD | | V18GALZN8C | D0012 | VOSSLOH-SCHWABE DEUTSCHLAND GMBH | | VH18A3P | D0012 | VOSSLOH-SCHWABE DEUTSCHLAND GMBH | | A18N12004DBL8451-12 | D8046 | DAIMLER AG | | DIN128-A18-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN128-A18-FST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN128A18A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN128A18GALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | A18DIN128FEZN8CX | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | A18DIN128GALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DZ01102804 | F3229 | WARTSILA FRANCE SAS | | N912004018101 | Z0C81 | MERCEDES-BENZ AUSTRALIA/PACIFIC PTYLTD DEALER PARTS ASSISTANCE CENTRE |
|
Techincal Specification:
| HARDNESS RATING | 44,0 ROCKWELL C MINIMUM AND 51,0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 18,2 MILLIMETERS MINIMUM AND 19,0 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17221 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL THICKNESS | 2,65 MILLIMETERS MINIMUM AND 2,95 MILLIMETERS MAXIMUM | | MATERIAL | STEEL | | OUTSIDE DIAMETER | 29,4 MILLIMETERS MAXIMUM | | OVERALL HEIGHT | 4,5 MILLIMETERS MINIMUM AND 5,1 MILLIMETERS MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267/9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE AND ZINC | | TEST DATA DOCUMENT | D8286-DIN128 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|