5310-12-142-0472 WASHER,LOCK Index 5305-12-142-0483 SCREW,CAP,HEXAGON HEAD

National Stock Number:
5310-12-142-0481

Federal Supply Class:
5310

National Item Identification Number:
121420481

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
(241)A39630-118629A3963ASTRA VEICOLI INDUSTRIALI SPA
(241)A39630-119871A3963ASTRA VEICOLI INDUSTRIALI SPA
000594D1280JUNGHEINRICH AG
0009901740D8046DAIMLER AG
0056988D8061CNH BAUMASCHINEN GMBH
0017730000D8218ROTZLER GMBH + CO. KG
1-3500-7019/31 IT3.19D4770SAACKE GMBH
06370P010126F5448CEFA
0894963H0001DAF TRUCKS N.V.
0202817H0001DAF TRUCKS N.V.
0522459H0001DAF TRUCKS N.V.
0844062H1632GKN FOKKER AEROSPACE B.V.
0204703-3U3725AEBI SCHMIDT UK LTD
0056988U4665TEREX UK LTD
243003710500124BSAPA OPERACIONES SL
5310121420481A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
1PA39630-118629A3963ASTRA VEICOLI INDUSTRIALI SPA
1PA39630-119871A3963ASTRA VEICOLI INDUSTRIALI SPA
10318773A486GNIMIKKEISTOKESKUS NCB FINLAND
38180.100.001B1603COMBORI NV
18 451 013C2011KESSLER & CO. GMBH & CO.KG
603103127D1343VOITH TURBO GMBH & CO. KG
6-1510-000478D4770SAACKE GMBH
6-1710-000503D4770SAACKE GMBH
10-5MITFASEDIN125STGALZN8CD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
6.15010-6212D9434RENK AKTIENGESELLSCHAFT
522459H0001DAF TRUCKS N.V.
202817H0001DAF TRUCKS N.V.
101201N0146ALVIS MOELV AS TIDL HAGGLUNDSMOELVAS
23884U4494EKA LIMITED
N/85-6/606/4C2268HAMANN AG
N 3501 051 5QC2463RHEINMETALL SOLDIER ELECTRONICS GMBH
7.312-005D0356KARCHER FUTURETECH GMBH
7.312-005.0D0356KARCHER FUTURETECH GMBH
6150106212D8266MTU FRIEDRICHSHAFEN GMBH
B10,5DIN125-ST-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10,5DIN125-STGALZN8CD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10,5DIN125STA3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10-5DIN125-ST-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10-5DIN125-STA3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10-5DIN125STA3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10-5DIN125STGALZN8CD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10-5DIN125STZN8CXD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10.5DIN125-140HVAD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
B10/5DIN125-ST-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-B10,5-140HV-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-B10,5-ST-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-B10-5-ST-A3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125B10,5STA3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125B10-5STA3PD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125B10-5STGALZN8CD8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
6150106212D9434RENK AKTIENGESELLSCHAFT
937900D9913GENERAL DYNAMICS EUROPEAN LAND SYSTEMS-BRIDGE SYSTEMS GMBH
894963H0001DAF TRUCKS N.V.
ML70020H0E45SARIS AANHANGERS
8469 ITEM 9L6427MOBILE VALVE REPAIRS
821-10-000R0216ARVID NILSSON A/S
991.4111S0213CARGOTEC SWEDEN AB, HIAB
N 3501 051 5QS3092RHEINMETALL AIR DEFENCE AG
N 3501 051 5QS3118OERLIKON-BUEHRLE AG WERKZEUGMASCHINENFABRIK
9914111Z1Q14B G CRANE PTY LTD
HIAB9914111Z4117VOLVO GROUP GOVERNMENT SALES OCEANIA
N/S10-6/606/7C2268HAMANN AG
N/S5-6/606/4C2268HAMANN AG


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING140,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 250,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM
HOLE DIAMETER10,5 MILLIMETERS NOMINAL
MATERIALSTEEL
PERIPHERAL SHAPE STYLEROUND
OUTSIDE LEFT CORNER CHAMFER ANGLE45,0 DEGREES NOMINAL
OVERALL DIAMETER20,0 MILLIMETERS NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDIN267/9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCHROMATE AND ZINC
TEST DATA DOCUMENTD8286-DIN125 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THICKNESS2,0 MILLIMETERS NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us