|
|
|
National Stock Number:
5310-12-126-3474
Federal Supply Class:
5310
National Item Identification Number:
121263474
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 10394125 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | DIN6797-J3,2-FST-PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN6797-J3,2-PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J3,2DIN6797-PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J3-2DIN6797PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J3-2DIN6797PHRE | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J3.2DIN6797-PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J3.2DIN6797PHR | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| HARDNESS RATING | 410.0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 490.0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 3.20 MILLIMETERS MINIMUM AND 3.38 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17222 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.4 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | OUTSIDE DIAMETER | 5.7 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN50942 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | TEST DATA DOCUMENT | D8286-DIN6797 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|