| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.500 INCHES NOMINAL |
| DRILLED HOLE DIAMETER | 0.137 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.312 INCHES NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |
| HOLE CONFIGURATION STYLE | CONFIGURATION G |
| HOLE TYPE AND QUANTITY | 2 DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5512 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5516 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 302 OVERALL |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.250 INCHES NOMINAL |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NUT LENGTH | 1.312 INCHES NOMINAL |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE NUT SPACER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, SPACER, PLATE PLAIN |
| PLATE THICKNESS | 0.090 INCHES NOMINAL |
| PLATE WIDTH | 0.625 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THRU-HOLE DIAMETER | 0.448 INCHES NOMINAL |