|
|
|
National Stock Number:
5310-01-627-6332
Federal Supply Class:
5310
National Item Identification Number:
016276332
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 167-8200543 ITEM NO 31 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 167-8278258 ITEM NO 27 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 167-8278265 ITEM 39 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 8200543 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 2.000 INCHES NOMINAL | | THICKNESS | 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HOLE DIAMETER | 0.780 INCHES MINIMUM AND 0.810 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 464 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER |
|
|