|
|
|
National Stock Number:
5310-01-626-7723
Federal Supply Class:
5310
National Item Identification Number:
016267723
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 90945A708 | 0KVE6 | MCMASTER-CARR SUPPLY CO | | 90945A708 | 4WUG7 | SUPERIOR WASHER & GASKET CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.11 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 AND STEEL COMP 302 AND STEEL COMP 303 AND STEEL COMP 304 AND STEEL COMP 305 OVERALL | | OVERALL DIAMETER | 0.18 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.02 INCHES MINIMUM AND 0.04 INCHES MAXIMUM |
|
|