|
|
|
National Stock Number:
5310-01-624-7994
Federal Supply Class:
5310
National Item Identification Number:
016247994
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| TS1456 | 98889 | AEROCONTROLEX GROUP, INC. | | TS1456-025 | 98889 | AEROCONTROLEX GROUP, INC. |
|
Techincal Specification:
| PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | | THICKNESS | 0.025 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.1270 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-P-330 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 510 OR COPPER ALLOY 524 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER-THRUST | | PERIPHERAL SHAPE STYLE | ROUND |
|
|