|
|
|
National Stock Number:
5310-01-624-6685
Federal Supply Class:
5310
National Item Identification Number:
016246685
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| DIN 125-6-A4 | 4S332 | MARYLAND METRICS | | DIN 125-6.4-A4-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 6.4 MILLIMETERS NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 12.0 MILLIMETERS NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 1.6 MILLIMETERS NOMINAL | | SPECIAL FEATURES | TENSILE STRENGTH = 700 NEWTONS PER SQUARE METER; 1SO 7089/DIN 125 A | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FLAT WASHER, STAINLESS STEEL, NORMAL SERIES, WITHOUT CHAMFER |
|
|