|
|
|
National Stock Number:
5310-01-623-6933
Federal Supply Class:
5310
National Item Identification Number:
016236933
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 7491198 PART NO. 12 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7491198 PART NO. 12L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | PSSSN21C-306/1-007L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | PSSSN21C-306/1-007 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | ZZZY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FRO LEVEL 1 ITEMS |
|
|