5310-01-622-2725, WASHER,FLAT

5905-01-622-3069 RESISTOR NETWORK,FIXED,WIRE WOUN

National Stock Number:
5310-01-622-2725

Federal Supply Class:
5310

National Item Identification Number:
016222725

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

AEW26X37W000SE3A31

05047

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
OVERALL DIAMETER	0.993 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	316,S31600 ANNEALED AUSTENITIC CR-NI-MO STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	WASHER,PLAIN,TYPE B PLAIN SIZES
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	05047-ASME B18.24-2004 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THICKNESS	0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM

Click here to Register for Free 30-day Trial