|
|
|
National Stock Number:
5310-01-621-9731
Federal Supply Class:
5310
National Item Identification Number:
016219731
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AEW24X37W000GD7AA1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1055,G10555 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B 633,TYPE 2,SC3 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HOLE DIAMETER | 0.438 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.0 INCHES NOMINAL | | THICKNESS | 0.375 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,FLAT |
|
|