|
|
|
National Stock Number:
5310-01-619-1660
Federal Supply Class:
5310
National Item Identification Number:
016191660
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3392AS1449 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OR | | STEEL COMP 304 OR | | STEEL COMP 316 OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BLACK OXIDE IAW MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.719 INCHES MINIMUM AND | | 0.749 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.055 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | COLOR | BLACK OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER |
|
|