|
|
|
National Stock Number:
5310-01-618-9224
Federal Supply Class:
5310
National Item Identification Number:
016189224
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AEW23X10N000GF32C1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEW23X10N000GF32C1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | G1922BS100N | 01417 | GENERAL DYNAMICS LAND SYSTEMS INC. | | G1922M | 01417 | GENERAL DYNAMICS LAND SYSTEMS INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 10.9 MILLIMETERS MINIMUM AND 11.1 MILLIMETERS MAXIMUM | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, PLAIN | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 19.5 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633, TYPE 111 OR V, FE/ZN2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THICKNESS | 1.6 MILLIMETERS MINIMUM AND 2.3 MILLIMETERS MAXIMUM |
|
|