|
|
|
National Stock Number:
5310-01-617-2294
Federal Supply Class:
5310
National Item Identification Number:
016172294
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-32J28C4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5604 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR | | AMS 5643 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700, MTD 1, TY 2, OR TY 8, CL 1 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.500 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL THICKNESS | 0.125 INCHES NOMINAL | | BOTTOM RECESS ANGLE | 45.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | HEAT TREAT 155 TO 175 KSI PER AMS-H-6875 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, FLAT, TENSION BOLT, CHAMFERED ID BOTH SIDES |
|
|