|
|
|
National Stock Number:
5310-01-617-0649
Federal Supply Class:
5310
National Item Identification Number:
016170649
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4804854-13 | 17454 | TIMKEN GEARS & SERVICES INC. | | 873E192 ITEM 57 | 01289 | GENERAL ELECTRIC COMPANY | | K-4804854 PT 13 | 01289 | GENERAL ELECTRIC COMPANY | | 873E192 ITEM 57 | 0YAS7 | TIMKEN GEARS & SERVICES INC. | | K-4804854 PT 13 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.812 INCHES NOMINAL | | LENGTH | 1.875 INCHES NOMINAL | | MATERIAL | STEEL COMP 1009 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | LOCKWASHER | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | HOLE OFF CENTER | | WIDTH ACROSS FLATS | 1.500 INCHES NOMINAL | | THICKNESS | 0.062 INCHES NOMINAL |
|