|
|
|
National Stock Number:
5310-01-615-4264
Federal Supply Class:
5310
National Item Identification Number:
016154264
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 98126A739 | 3A054 | MCMASTER-CARR SUPPLY CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 70.0 ROCKWELL B MINIMUM | | HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.511 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 18-8 STAINLESS STEEL IAW ASTM A240 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | MATERIAL | STEEL PROPERTY CLASS 18.8 OVERALL | | OVERALL DIAMETER | 0.750 INCHES MINIMUM AND 0.752 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | MAY BE MILDLY MAGNETIC | | THICKNESS | 0.058 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
|
|