5995-01-615-7596 CABLE ASSEMBLY,RADIO FREQUENCY 1615-01-615-6062 PITCH SHAFT ASSY.

National Stock Number:
5310-01-615-3032

Federal Supply Class:
5310

National Item Identification Number:
016153032

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
301776A196GMASTSYSTEM INT'L OY
800914097B0TIM PRICE INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLEBLANK RECTANGULAR
HOLE DIAMETER0.240 INCHES NOMINAL
MATERIALSTEEL OVERALL
III PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.740 INCHES NOMINAL
THICKNESS0.070 INCHES NOMINAL


Click here to Register for Free 30-day Trial