| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL CORROSION RESISTING LOCKING INSERT |
| ALUMINUM ALLOY 6061 OVERALL EXCEPT INSERT |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2B |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-12545 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT |
| SURFACE TREATMENT | ANODIZE OVERALL EXCEPT INSERT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| NUT LENGTH | 0.975 INCHES MINIMUM AND |
| 0.995 INCHES MAXIMUM |
| NUT HEIGHT | 1.780 INCHES MINIMUM AND |
| 1.820 INCHES MAXIMUM |
| PLATE THICKNESS | 0.050 INCHES MINIMUM AND |
| 0.070 INCHES MAXIMUM |
| PLATE WIDTH | 0.386 INCHES MINIMUM AND |
| 0.406 INCHES MAXIMUM |
| HOLE CONFIGURATION STYLE | CONFIGURATION F |
| HOLE TYPE AND QUANTITY | 2 DRILLED |
| DRILLED HOLE DIAMETER | 0.063 INCHES MINIMUM AND |
| 0.070 INCHES MAXIMUM |
| LUBRICATION | DRY FILM LUBRICANT |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.148 INCHES NOMINAL |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.334 INCHES MINIMUM AND |
| 0.354 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND |
| 0.690 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, STAND-OFF, RIGHT ANGLE, TWO LUG |