|
|
|
National Stock Number:
5310-01-611-7787
Federal Supply Class:
5310
National Item Identification Number:
016117787
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 98884A305 | 39428 | MCMASTER-CARR SUPPLY CO | | 98884A425 | 39428 | MCMASTER-CARR SUPPLY CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 65.0 SHORE DUROMETER A NOMINAL | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM +2256A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CORK RUBBER SEALING WASHER | | MATERIAL | CORK AND RUBBER NEOPRENE OVERALL | | OVERALL DIAMETER | 0.625 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | WASHER IS MADE OF A BLEND OF CORK GRANULES AND NEOPRENE;COLOR IS TAN;TEMPERATURE RANGE IS NEGATIVE 10DEG TO PLUS 120DEG;WASHER IS OIL AND FUEL RESISTANT | | THICKNESS | 0.062 INCHES NOMINAL |
|
|