|
|
|
National Stock Number:
5310-01-603-6553
Federal Supply Class:
5310
National Item Identification Number:
016036553
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 755482-3 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 TYPE I ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | MATERIAL | STEEL COMP 303 OR STEEL COMP 302 OR STEEL COMP 301 OR STEEL COMP 304 OVERALL | | OVERALL DIAMETER | 0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM |
|
|