|
|
|
National Stock Number:
5310-01-602-4075
Federal Supply Class:
5310
National Item Identification Number:
016024075
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10010108 | 61C19 | MIL-COTS CORPORATION | | 3011416 | 0B9F4 | RKR TECHNOLOGIES, LTD. | | 3011416 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 3011416 | 3T063 | MOTOR CITY FASTENERS INC | | 3011416 | 4JEL0 | REXEL USA, INC. | | 3011416 | 57550 | RELLI TECHNOLOGY, INC | | 40357 | 0Y3H3 | FASTENAL COMPANY | | S000009 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 3011416 | 7W356 | GENERAL DYNAMICS LAND SYSTEMS INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 8.90 MILLIMETERS MINIMUM AND 9.12 MILLIMETERS MAXIMUM | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, FLAT HARD METRIC ZN | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 18.37 MILLIMETERS MINIMUM AND 18.80 MILLIMETERS MAXIMUM | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 1.60 MILLIMETERS MINIMUM AND 2.30 MILLIMETERS MAXIMUM |
|
|