|
|
|
National Stock Number:
5310-01-596-7240
Federal Supply Class:
5310
National Item Identification Number:
015967240
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 90295A200 | 39428 | MCMASTER-CARR SUPPLY CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.810 INCHES NOMINAL | | MATERIAL | PLASTIC NYLON OVERALL | | OVERALL DIAMETER | 1.060 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | FOR SCREW SIZE: 3/4 INCH NOMINAL;MATERIAL TYPE: PLASTIC,PLASTIC TYPE: NYLON 6/6;FINISH: PLAIN;COLOR: OFF-WHITE;APPLICATION: INSULATING WASHER;OPERATING TEMPERATURE RANGE: UP TO 180 DEGREE FAHRENHEIT | | THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
|
|