|
|
|
National Stock Number:
5310-01-595-4000
Federal Supply Class:
5310
National Item Identification Number:
015954000
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 98370A033 | 39428 | MCMASTER-CARR SUPPLY CO | | Z9099SS | 4TU30 | ACCURATE MANUFACTURED PRODUCTS GROUP INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | 18-8 STAINLESS STEEL WASHER | | MATERIAL | STEEL COMP 302 OVERALL | | OVERALL DIAMETER | 1.125 INCHES NOMINAL | | SPECIAL FEATURES | APPLICATION FIXTURING WASHER | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
|
|