|
|
|
National Stock Number:
5310-01-594-9424
Federal Supply Class:
5310
National Item Identification Number:
015949424
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2124800-007 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.338 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SEAT, WASHER SCREW, CAP, SOCKETHEAD | | MATERIAL | STEEL OVERALL | | OVERALL DIAMETER | 0.499 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | MATT CARON STEEL ASTM A684 OR ASTM A576; ZINC PLATE PER ASTM B633, TYPE II, SC3; | | THICKNESS | 0.089 INCHES NOMINAL |
|
|