|
|
|
National Stock Number:
5310-01-592-6267
Federal Supply Class:
5310
National Item Identification Number:
015926267
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| BACW10P392CC | 81205 | THE BOEING COMPANY | | BACW10P392CC | Z0HA9 | BOEING DEFENCE AUSTRALIA |
|
Techincal Specification:
| MATERIAL | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 302 OR | | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5512 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5516 ASSN STD SINGLE MATERIAL RESPONSE OR | | MAS 5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS -QQ-P-35 TYPE VI OR VII ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.193 INCHES MINIMUM AND | | 0.213 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.870 INCHES MINIMUM AND | | 0.890 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.063 INCHES NOMINAL |
|
|