5310-01-560-8129, WASHER,FLAT

National Stock Number:
5310-01-560-8129

Federal Supply Class:
5310

National Item Identification Number:
015608129

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

TAS8604-13

05395

L3HARRIS TECHNOLOGIES INTEGRATED SYSTEMS L.P.

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OUTSIDE LEFT CORNER CHAMFER ANGLE	40.0 DEGREES NOMINAL
OVERALL DIAMETER	0.286 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6E. T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	WASHER COUNTERSINK REWORK
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625D MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THICKNESS	0.055 INCHES NOMINAL

Click here to Register for Free 30-day Trial