5410-01-549-9080 COVER CARRY PANEL Index 2510-01-549-9082 PANEL,VEHICULAR OPERATION

National Stock Number:
5310-01-549-9081

Federal Supply Class:
5310

National Item Identification Number:
015499081

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2621-906-13 ITEM 8596169ELECTRIC BOAT CORPORATION
2621-906-13 ITEM 85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
262190613-85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
7383858-262190613-85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
7383858-262190613-8553711NAVAL SEA SYSTEMS COMMAND
262190613-8596169ELECTRIC BOAT CORPORATION
7550478-262190613-85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
G547-0002-262190613-85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
H547-0001-262190613-85CP03950NAVAL INVENTORY CONTROL POINT MECHANICSBURG
7550478-262190613-8553711NAVAL SEA SYSTEMS COMMAND
H547-0001-262190613-8596169ELECTRIC BOAT CORPORATION
G547-0002-262190613-8596169ELECTRIC BOAT CORPORATION
MS28782-4CP96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
HOLE DIAMETER0.219 INCHES NOMINAL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
III PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER
PROPRIETARY CHARACTERISTICSPACS
SPECIAL FEATURESMATERIAL = SAE-AS8791
WIDTH0.054 INCHES MINIMUM AND 0.056 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us