|
|
|
National Stock Number:
5310-01-523-9101
Federal Supply Class:
5310
National Item Identification Number:
015239101
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| NAS1515K08L | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1515K08L | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.169 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.370 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.015 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | SPECIAL FEATURES | EDGE OF CENTER HOLE COLOR CODED ORANGE; WASHER IS INORGANIC ESTER RESISTANT; USED ON VALUE GUAGE INSTALLATION - BRAKE ACCUMULATOR CHARGING (LANDING GEAR ONLY) |
|
|